[ovs-discuss] Question about setting Open vSwitch on top of CentOS with XEN support
guessi at gmail.com
Sat Jul 9 13:45:23 PDT 2011
On Sun, Jul 10, 2011 at 4:11 AM, Ben Pfaff <blp at nicira.com> wrote:
> It's probably a bridge port on a Linux bridge. You need to disable
> whatever is creating that and make it use Open vSwitch instead.
> You need to do that before anything else will make sense.
Thanks for answering my question, that's really help for me a lot, Ben.
After disable Linux bridge, it goes smoothly as I expect.
Here is my steps:
After the steps mention in INSTALL.Linux
$ ovs-vsctl list-br
to make sure there is no virtual bridge created by OVS
then I got the devices info:
# su -
# ifconfig eth0 0.0.0.0
# ovs-vsctl add-br vbr0
# ovs-vsctl add-port vbr0 eth0
# ovs-vsctl add-port vbr0 vif0.0
--- for Static IP:
# ifconfig vbr0 aa.bb.cc.dd netmask 255.255.255.0 up
# route add default gw aa.bb.cc.254
--- for DHCP:
# dhclient vbr0
then, follow the steps INSTALL.Bridge
Is these commands right for Dom-0's configuration?
If it were right for Dom-0, what will be my next step for Dom-U's network
configuration, any suggestion?
Again, thanks a lot !
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the discuss